r.slope.aspect

NAME

r.slope.aspect - Generates raster map layers of slope, aspect, curvatures and partial derivatives from a raster map layer of true elevation values.
(GRASS Raster Program)

SYNOPSIS

r.slope.aspect
r.slope.aspect help
r.slope.aspect [-aq] elevation=name [slope=name] [aspect=name] [format=name] [zfactor=value] [prec=name] [pcurv=name] [tcurv=name] [dx=name] [dy=name] [dxx=name] [dyy=name] [dxy=name] [min_slp_allowed=value]

DESCRIPTION

r.slope.aspect generates raster maps of slope, aspect, curvatures and first and second order partial derivatives from a raster map layer of true elevation values. The user must specify the input elevation file name and at least one output file name. The user can also specify the format for slope (degrees, percent; default=degrees), and zfactor: multiplicative factor to convert elevation units to meters; (default 1.0).

OPTIONS

The program will be run non-interactively if the user specifies program inputs and any desired options on the command line, using the form

r.slope.aspect [-aq] elevation=name [slope=name] [aspect=name] [format=name] [zfactor=value] [prec=name] [pcurv=name] [tcurv=name] [dx=name] [dy=name] [dxx=name] [dyy=name] [dxy=name] [min_slp_allowed=value]

If the user runs:

r.slope.aspect

without command line arguments, the program will prompt the user for flag settings and parameter values.

Flags:

-a: Do not align the settings of the current geographic region (to which the output slope and aspect map layers will be set) to those of the elevation layer. See NOTES.
-q: Run quietly, and suppress the printing of information on program operations during execution.

Parameters:

elevation=name: Name of the raster map layer of true elevation values to be used as input.
slope=name: Name of a raster map layer of slope values created from the elevation map.
aspect=name: Name of a raster map layer of aspect values created from the elevation map.
format=name: format for reporting the slope; options: degrees,percent; default: degrees.

zfactor=value

Multiplicative factor to convert elevation units to meters (default: 1.0).

pcurv =name
          Output profile curvature filename
tcurv =name
          Output tangential curvature filename
dx=name
          Output E-W slope filename
dy=name
          Output N-S slope filename
dxx=name
          Output partial derivative dxx filename
dyy=name
          Output partial derivative dyy filename
dxy =name
         Output partial derivative dxy filenam
min_slp_allowed =value
          Minimum slope value (in percent) for which aspect is computed.(default: 0.0)
prec=name
          type of output aspect and slope maps
          options: default,double,float,int
The raster elevation map layer specified by the user must contain true elevation values, not rescaled or categorized data.
The raster aspect map layer which is created indicates the direction that slopes are facing. The aspect categories represent the number degrees of east. Category and color table files are also generated for the aspect map layer. The aspect categories represent the number degrees of east and they increase counterclockwise: 90deg is North, 180 is West, 270 is South and 360 is East.
The resulting raster slope map layer will contain slope values, stated in degrees of inclination from the horizontal if format=degrees option (which is also default ) is chosen, and in percent rise if format=percent option is chosen. The category file, but not the color table, is generated by r.slope.aspect for the raster slope map layer.Profile and tangential curvatures are the curvatures in the direction of steepest slope and in the direction of the countour tangent respectively.

For some applications, the user will wish to use a reclassified map layer of slope that groups slope values into ranges of slope. This can be done using r.reclass. An example of a useful reclassification is given below:

          category      range   category labels
                     (in degrees)    (in percent)

             1         0-  1             0-  2%
             2         2-  3             3-  5%
             3         4-  5             6- 10%
             4         6-  8            11- 15%
             5         9- 11            16- 20%
             6        12- 14            21- 25%
             7        15- 90            26% and higher

     The following color table works well with the above
     reclassification.

          category   red   green   blue

             0       179    179     179
             1         0    102       0
             2         0    153       0
             3       128    153       0
             4       204    179       0
             5       128     51      51
             6       255      0       0
             7         0      0       0

NOTES

To ensure that the raster elevation map layer is not inappropriately resampled, the settings for the current region are modified slightly (for the execution of the program only): the resolution is set to match the resolution of the elevation map and the edges of the region (i.e. the north, south, east and west) are shifted, if necessary, to line up along edges of the nearest cells in the elevation map. If the user really wants the elevation map resampled to the current region resolution, the -a flag should be specified.

The current mask, if set, is ignored.

The algorithm used to determine slope and aspect uses a 3x3 neighborhood around each cell in the elevation file. Thus, it is not possible to determine slope and aspect for the cells adjacent to the edges in the elevation map layer. These cells are assigned a "no data" value (category 0) in both the slope and aspect raster map layers.

Because Horn's formula is used to find the derivatives in x and y directions, the aspect is biased in 0, 45, 90, 180, 225, 270, 315, and 360 directions; i.e., the distribution of aspect categories is very uneven, with peaks at 0, 45,..., 360 categories.
Because most cells with a very small slope end up having category 0, 45,..., 360 it is sometimes possible to reduce bias in these directions by filtering out computation of aspect in areas where terrain is almost flat. The new option

min_slp=value

was added (minimum slope for which aspect is computed). The aspect for all cells with slope < min_slp is set to 0 (no value).

WARNING

the following may not be true anymore because of introduction of NULL, but it has not been tested

Elevations of zero (as well as below sea level elevations) are valid. This means that areas assigned category value 0 may have one of two possible meanings: they may either be areas of "no data" or areas having 0 elevation.

If the user wishes r.slope.aspect to assume that cells assigned category value zero in the elevation map layer represent true elevation values, not areas of "no data", the user should set the -z flag when running this program.

If the -z flag is not set and the raster map layer of true elevation contains areas of "no data" that are assigned to category 0, either at its edges or in its interior, incorrect (and usually quite large) slopes will result.

AUTHORS

Michael Shapiro, U.S.Army Construction Engineering Research Laboratory

Olga Waupotitsch, U.S.Army Construction Engineering Research Laboratory